Konica Minolta BIZHUB 750 Function Manual page 242

4
E-Mail TX (SMTP) screen 3/4
Item
Connection Timeout
Server Capacity
E-Mail TX (SMTP) screen 4/4
Item
SSL Settings
Port Number (SSL)
Port Number
SMTP Detail screen
Item
POP Before SMTP
SMTP Authentication
POP Before SMTP Time
4-104
Specifying Settings From the Control Panel
Description
If the operation delays while sending mail to the SMTP
server, mail transmission is automatically aborted after a
specified time elapses. Set the time from the point when
the transmission stops to the point when the mail transmis-
sion is to be aborted. To change the value, press the [C]
(clear) key, and then use the keypad to type in the value
(between 30 and 300 seconds).
Sets the maximum capacity that the SMTP server can re-
ceive per mail. To change the value, press the [C] (clear)
key, and then use the keypad to type in the value (between
1 and 100 MB). To apply no restriction, touch [Unlimited].
Description
Specify whether to use SSL during e-mail transmission.
When SSL is used, the content that is sent is encrypted.
Specify the port number for using SSL. To change the val-
ue, touch [Input], press the [C] (clear) key, and then use the
keypad to type in the value (between 1 and 65535).
Specify the port number for the e-mail transmission. To
change the value, touch [Input], press the [C] (clear) key,
and then use the keypad to type in the value (between 1
and 65535).
Description
Select whether to use POP Before SMTP authentication.
Select whether to use SMTP authentication. If [ON] is
touched, the screen for entering the SMTP authentication
information appears. For details on specifying the setting,
refer to "SMTP Authentication" on page 4-110.
Specify if using POP Before SMTP authentication. To
change the value, press the [C] (clear) key, and then use the
keypad to type in the value (between 0 and 60 seconds).
bizhub 750/600 (Phase 2)