Smtp Server Address - Konica Minolta BIZHUB 750 Function Manual

Specifying Settings From the Control Panel

SMTP Server Address

The SMTP server address used to send e-mail can be specified.
1
In the E-Mail TX (SMTP) screen 2/4, touch [Host Address].
The Host Address screen appears.
2
Touch [IP Address Input] or [Host Name Input].
– To specify the host address with the IP address, touch [IP Address
Input].
– To specify the host address with the host name, touch [Host Name
Input].
– If selecting [Host Name Input], check that the DNS settings are
specified correctly before making the selection. For details, refer to
"TCP/IP Settings" on page 4-56.
3
Enter the host address (IP address or host name (up to 255
characters)).
– To edit the values that you entered with "IP Address Input", touch
[
and enter the new value.
– To clear all values, press the [C] (clear) key.
4
Touch [OK].
The SMTP server address is set.
bizhub 750/600 (Phase 2)
] or [ ] to move the cursor to the desired area, touch [Delete],
4
4-107