Konica Minolta BIZHUB PRO 1050P User Manual page 347

9
Fonts cannot be downloaded
It is possible that [Spool] is set to [On] in Printer Setting Menu on the copier's
control panel.
Set [Spool] to [Off], switch off the copier's main power, wait 10 seconds or
more, switch it back on, and then try downloading fonts again.
For details on how to download fonts, refer to the user manual that comes
with the fonts.
Direct PDF printing results in PDF to PS Conversion Error: Write error
Memory more than that loaded is required for PDF file printing.
You can print it normally by turning ON the [Printer Setting] - [PS Setting] -
[02 PDF -> PS Conversion error control].
Changing this setting may decrease the performance in ordinary printing.
Keep it [OFF] usually except when printing specific files.
Non fixed size paper can not be printed correctly (Macintosh)
The direction in which non fixed size paper is loaded in the copier may be
incorrect.
Rotate the paper direction 90 degrees and then try printing after changing
the settings of the driver and copier accordingly.
9-8 bizhub PRO 1050 Printer Controller
Troubleshooting