Konica Minolta BIZHUB PRO 1050P User Manual page 317

8
Tandem Mode cannot be set in the following cases:
- When [Transparency Interleave] is selected in [Setup] window.
Output Tray
Selects the output tray.
Each of them can/cannot be set in the following cases:
- Each options which is not selected on the [Printer Info] window cannot be
set.
- When [Staple] is available, any item other than [Default] and [Stapler Main
Tray] can not be set.
Output Order
Selects the output order.
- [Face Down] outputs paper with the printed side facing down.[Face Up]
outputs paper with the printed side facing up.
Image Order
Select the image order.
- The [1 to N] outputs paper starting with the first page.
- The [N to 1] outputs paper starting with the last page.
Binding Position
Sets the binding position for the document to be printed. The position select-
ed here will be the position of stapling, punching and base position of the im-
age shift.
Duplex
Prints continuous multiple pages on both front and back sides.
8-16
PPD Printer Driver setting (Mac OS X)
Master copier
bizhub PRO 1050 Printer Controller
Sub copier