Konica Minolta BIZHUB PRO 1050P User Manual page 183

5
– Select [Wait Mode] to wait before printing the document to check
the current setting from the control panel of copier.
– Select [Proof and Print] to print the one copy as a test to check the
output and the current setting from the control panel of copier.
4
Click [OK] to close the [Printing Preferences].
5
Click [Print] to perform printing from the application.
– When the [Wait Mode] is selected, it stops without being printed.
– When the [Proof and Print] is selected, only one set is printed and it
stops.
– When the Mode Check screen is not displayed, press [MACHINE].
On the copier's control panel, the Mode Check screen appears.
6
Confirm the current settings.
If you do not change any setting, pro-
ceed to the step 9.
7
To change the setting, select the
item to be changed and press the
[Change].
– When storing the job in the hard
disk, select [Output Application]
and press the [Change].
8
Change the settings and press the [OK].
The [MACHINE] tab appears.
9
Press [START] to resume the rest of the print job.
!
Detail
For more information about the method of storing the job in and output-
ting it from the hard disk, refer to "bizhub PRO 1050 User Manual (Net-
work Scanner)".
5-34
PPD Printer Driver setting (Windows)
bizhub PRO 1050 Printer Controller