Konica Minolta BIZHUB PRO 1050P User Manual page 178

PPD Printer Driver setting (Windows)
Punch
The output paper can be set to be punched with 2 holes,3 holes or 4 holes.
The position will be changed according with the [Binding] setting.
The [Punch] cannot be set in the following cases:
- When the [Multi Folder] is not available in the [Device Settings] tab - [In-
stallable Options]
- When the [245-300 g/m
- When the other than [Z-fold] is selected in the [Fold]
Note
Punch holes which can be specified vary depending on the destinations.
USA : Either 2 or 3 holes can be specified.
Others : Either 2 or 4 holes can be specified.
bizhub PRO 1050 Printer Controller
2 Holes/Left Binding
(Portrait)
2 Holes/Left Binding
(Landscape)
2 Holes/Top Binding
(Portrait)
2
] is selected in the [Paper Weight]
2 Holes/Right Binding
(Portrait)
2 Holes/Right Binding
(Landscape)
2 Holes/Top Binding
(Landscape)
5
5-29