Chapter - Konica Minolta BIZHUB PRO 1050P User Manual

KONICA MINOLTA PS Printer Driver setting (Windows)

6.12.4 Chapter

Chapter - Page Number
For the KONICA MINOLTA PS printer driver, print a specific page so that it
comes on the front, when printing on [Duplex] or [Booklet].
Multiple page numbers can be entered. When entering multiple page num-
bers, use commas to separate them as in the following example: [2,4,6]. A
range can be specified with a hyphen as in the following example: [6-10].
Example
The example is long-side folded, but duplex printing can also be done with short-side folded
documents.
Page 1 is printed
This is the front side
The [Chapter] cannot be set in the following cases:
- The [Single-Sided] is selected in the [Setup] tab - [Print Type].
bizhub PRO 1050 Printer Controller
Description
Regular duplex printing.
Duplex printing when edited by chapter function.
If a page specified as an opening page of a chapter comes to a
back side, insert a blank page to shift the location of the speci-
fied page to the front side of the next paper.
Regular pamphlet printing.
Pamphlet printing when edited by chapter.
If a page specified as an opening page of a chapter does not
come to the front side, a blank page is inserted, and the specified
page will slide to the front side of the next paper.
Example:
page 4 is the opening page of a chapter function.
A specified
page
6
6-47