For Windows Xp/Server 2003 - Konica Minolta BIZHUB C250P User Manual

2

For Windows XP/Server 2003

1
Insert the Windows printer driver CD-ROM into the computer's CD-
ROM drive.
– Konica Minolta PCL driver: User Software CD-ROM
– Konica Minolta PostScript driver: PostScript Printer Driver CD-
ROM
2
Click the [Start] button, and then click "Printers and Faxes".
– If "Printers and Faxes" is not displayed in the Start menu, click
"Control Panel" in the Start menu, double-click "Printers and Other
Hardware", and then double-click "Printers and Faxes".
3
For Windows XP, click "Add a printer" on the "Printer Tasks" menu.
– For Windows Server 2003, double-click the "Add Printer" icon.
The Add Printer Wizard starts up.
4
Click the [Next] button.
5
Select "Local printer attached to this computer", and then click the
[Next] button.
– Clear the "Automatically detect and install my Plug and Play print-
er" check box.
6
The Select Printer Port dialog box appears. Select "LPT1" here, and
then click the [Next] button.
7
Click the [Have Disk] button.
8
Click the [Browse] button.
9
Specify the folder on the CD-ROM that contains the printer driver for
the operating system that you are using, and then click the [OK] button.
– Konica Minolta PCL driver: Folder at Driver\Drivers on the User
Software CD-ROM
– Konica Minolta PostScript driver: Folder at Driver\Drivers on the
PostScript Printer Driver CD-ROM
2-10
Setting up the printer driver
C250P