6
To replace the staple cartridge for Finisher FS-603
1
Open the front door of the finisher.
2
Turn misfeed-clearing dial 1 clock-
wise until the removal indicator is
completely blue.
What should be done if misfeed-
?
clearing dial 1 is turned too far?
% Turn the misfeed-clearing dial 1
counterclockwise to finely adjust
it.
3
Slowly pull out the stapler unit as far
as possible.
4
Grasp both sides of the staple car-
tridge holder, lift it up, and then pull it
out.
6-12
Replacing consumables
-
Misfeed
clearing
dial 1
Stapler unit
Staple cartridge
holder
Removal
indicator
C250P