Emptying The Waste Containers - Konica Minolta BIZHUB C250P User Manual

7

Emptying the waste containers

If the hole-punch waste container in punch kit installed on Finisher FS-603
becomes full, the message shown below appears (if it can be emptied by the
user).
Note
When the message "Punch Scrap Full Call Service" appears, contact the
service representative.
The setting for the message contents for emptying the hole-punch waste
container must be specified by the service representative. For details,
contact the service representative.
!
Detail
If the hole-punch waste container becomes full, printing cannot be per-
formed with a Punch setting. To continue printing, empty the hole-punch
waste container or cancel the Punch setting.
7-6
Maintenance
C250P