Specifying Macintosh Settings; For Mac Os X - Konica Minolta BIZHUB C250P User Manual
Hide thumbs
Also See for BIZHUB C250P:
- User manual (538 pages) ,
- Service manual (422 pages) ,
- System administrator manual (52 pages)
Table of Contents
Advertisement
Setting up the printer driver
Specifying Macintosh settings
Use the Macintosh computer that is connected to specify the TCP/IP and
AppleTalk settings.
Reminder
For network settings, consult the network administrator.
For printer driver installation, refer to "Installing the printer driver" on
page 2-21.
For Mac OS X
1
On the Apple menu, select "System Preferences".
2
Click the "Network" icon.
3
From "Show", select "Built-in Ethernet".
4
Click the AppleTalk tab.
5
Check that the "Make AppleTalk Active" check box is selected.
6
Click the TCP/IP tab.
7
Select the items from "Configure" that correspond to the network set-
tings for the Macintosh computer that is connected to the network, and
then set the IP address and subnet mask.
8
Click the close button in the upper-left corner of the dialog box.
The "Apply configuration changes?" message appears.
9
Click the [Apply] button.
The AppleTalk and Ethernet settings are saved.
C250P
2
2-63
Advertisement
Table of Contents
Troubleshooting
