Admin. Setting - Konica Minolta BIZHUB C250P User Manual

Control panel settings

Admin. Setting

This section describes the parameters and main settings that can be speci-
fied after pressing the [Menu/Select] key, then selecting "Admin. Setting".
Network Setting
TCP/IP
NetWare
C250P
Parameters
TCP/IP Setting
Network Speed
DHCP Setting
IP Address
Subnet Mask
Default Gateway
RAW Port No.
DNS Host Name
DNS Domain Name
DNS Server
IP Filtering
NetWare Setting
Ethernet Frame
Operation Mode
Pserver
NDS/Bindery Set
File Server Name
NDS
N/R Printer
Description
Select whether or not TCP/IP is en-
abled.
Select the operating speed.
Select this option if a DHCP server
is being used.
Specify the IP address of the ma-
chine.
Specify the subnet mask of the con-
nected network.
Specify the default gateway ad-
dress.
Specify the RAW port number.
Specify the host name.
Specify the domain name.
Register the addresses of the DNS
servers.
Specify the settings for IP address
filtering.
Select whether or not NetWare is
enabled.
Select the frame type.
Select the operating mode for the
print server.
Select the operating mode for the
print server.
Select either "Bindery" or "NDS".
Specify the preferred file server for
bindery.
Specify the NDS settings.
Specify the printer name and printer
number.
4
Initial Setting
Enable
Auto
—
—
—
—
—
—
—
—
—
Disable
—
—
—
—
—
—
—
4-31