Konica Minolta BIZHUB C250P User Manual page 124

2
– NetWare Print: Select "Enable".
– Frame Type: Select "Auto". (Select the frame type according to the
network environment.)
– Mode: Select "Pserver".
– Print Server Name: Specify the print server name created in step 4.
– Print Server Password: Specify only when setting from the NetWare
server. (Displayed by "----".)
– Print Queue Scan Rate: Specify "1". (Change as necessary.)
– Bindery/NDS: Select "NDS".
– Preferred NDS Context Name: Specify the name of the context that
connects to Pserver.
– Preferred NDS Tree Name: Specify the name of the tree that Pserv-
er logs on to.
6
Restart this machine (turn it off, then on again).
7
Use the NetWare server console to load MONITOR.NLM.
8
Select the connection information and, in the active connection col-
umn, check that the created Pserver is connected.
Note
For queue user privileges, the printer notification option, assignment of
multiple queues, and passwords, refer to the NetWare documentation,
and specify settings as necessary.
Reminder
When turning the machine off, wait for 10 seconds or longer before turn-
ing it on again; otherwise the machine may not function normally.
2-58
Setting up the printer driver
C250P