Konica Minolta BIZHUB C250P User Manual page 120

2
– NetWare Print: Select "Enable".
– Frame Type: Select "Auto". (Select the frame type according to the
network environment.)
– Mode: Select "Pserver".
– Print Server Name: Specify the print server name created in step 4.
– Print Server Password: Specify only when setting from the NetWare
server. (Displayed by "----".)
– Print Queue Scan Rate: Specify "1". (Change as necessary.)
– Bindery/NDS: Select "Bindery".
– Preferred File Server: Specify the name of the file server that con-
nects to Pserver.
7
Restart this machine (turn it off, then on again).
8
Use the NetWare server console to load MONITOR.NLM.
9
Select the connection information and, in the active connection col-
umn, check that the created Pserver is connected.
Reminder
When turning the machine off, wait for 10 seconds or longer before turn-
ing it on again; otherwise the machine may not function normally.
2-54
Setting up the printer driver
C250P