Table of Contents
Advertisement
36
5. Interrupt Mode
The Interrupt mode allows you to interrupt a current job and run a different one. The copier
ensures that the old job will be resumed as soon as the Interrupt mode is canceled.
Interrupting a Copy Cycle
Press the Interrupt Key.
1
Interrupt
The message changes to "Now in
Interrupt Mode. Press
original job." and, after a short time,
the current copy cycle is stopped.
Auxiliary
Finishing
Now in Interrupt Mode. Press
to return to original job.
Auto Expo.
x1.000
Exposure
Enter the control panel settings for the
2
interrupt job and press the Start Key.
NOTES
•
If the current job involves 2-sided
copying, Cover, Page Insertion, or
OHP Interleaving, the copier rejects an
Interrupt mode.
•
If the current job involves the Sort,
Sort-and-Staple, Group, Non-Sort is
automatically selected at the same time
when the copier is set into the Interrupt
mode.
1139O2602A
1139O2602A
to return to
Orig.
Copy
Basics
1
Auto Paper
Zoom
Paper
1075O271CA
1075O271CA
When the interrupt cycle is completed,
3
press the Interrupt Key again.
Interrupt
The copier is restored to the previous
settings.
Press the Start Key to resume the old
4
job.
Start
1139O2612A
1139O2612A
Stop
1134P337CA
Advertisement
Table of Contents
