CONTROLS
Clutch lever
5.1
Hot start lever
5.2
Hand brake lever
5.3
Short circuit button
5.4
Electric starter button
5.5
The clutch lever
The clutch is hydraulically operated and self-adjusting.
800024-10
The hot start lever
If you pull the hot start lever to the handlebar during the start procedure, a bore is
opened in the carburetor through which the engine can draw in extra air. This gives a
leaner fuel-air mixture, which is needed for a hot start.
Possible states
Hot start function activated – Hot start lever is pulled out to the stop.
•
Hot start function deactivated – Hot start lever is pushed back to the stop.
•
800024-11
Hand brake lever
The hand brake lever is used to activate the front brake.
400196-10
Short circuit button
Possible states
•
Short circuit button
closed, and the engine can be started.
•
Short circuit button
a running engine stops, and a non-running engine will not start.
400197-10
Electric starter button
Possible states
•
Electric starter button
•
Electric starter button
400198-10
is fitted on the left side of the handlebar.
is fitted on the left side of the handlebar.
is located on the right side of the handlebar.
is fitted on the left side of the handlebar.
in basic position – In this position, the ignition circuit is
pressed – In this position, the ignition circuit is interrupted,
is fitted on the right side of the handlebar.
in basic position
pressed – In this position, the electric starter is actuated.
10