Hidden Codes - Comdial DX-80 User Manual

Operation – Use the Headset to Answer a Call
1. While the telephone is ringing, press
flashes to indicate that the headset is active. The ringing call is
answered and connected to the headset.
2. Press again to disconnect the current call.

Hidden Codes

The Hidden Code feature allows you to store a four-digit code so you can
dial it by pressing only one button. (To operate, the Hidden Code must be
stored on a Flexible Feature button.) This feature is typically used to store a
password for the voice mail mailbox.
Operation – Storing a Code
1. While the telephone is idle, access Flexible Feature Button
Programming (
stored with your Hidden Code.
2. Press [chg].
3. Press [feat].
4. Press
5. Press [save].
6. Press to exit Flexible Feature Button Programming.
Operation – Using the Hidden Code
1. Access the voice mail system (either the DX-80 Voice or an external
voice mail system) by pressing the feature button designated as
VOICE MAIL (if available).
2. When you hear the prompt to enter your password, press the Hidden
Code button.
DX-80 Digital Executive Telephone User Guide
. The
) and then press the feature button to be
AVAILABLE KEY
chg
SELECT FUNCTION
dir feat
FTR CODE:_
bksp save chg
+ {the four-digit code to store}.
button LED
Page 45