Remote Program (Cmd 43); Security System Limitations - Bosch D621 Series User Manual

D621 Series | User's Guide | Remote Program (Cmd 43)

Remote Program (Cmd 43)

o I can perform this command.
o I cannot perform this command.
This command forces the system to connect to your security
company's remote PC computer for programming alterations
via the telephone line. Only use this feature under the
direction of your security company.
1. Ensure the system is turned off (All and Part indicators are
off).
2. Press [Cmd] [4] [3]. The keypad may prompt you to enter
a valid passcode by flashing the Cmd indicator.
3. Enter your passcode. The keypad emits a single-beep
tone, indicating the remote programming session has
begun. When the session is completed, the keypad
automatically exits this command.
Bosch Security Systems | 8/04 |

Security System Limitations

Not even the most advanced security system can guarantee
protection against burglary, fire, or environmental threats. All
security systems are subject to possible compromise or failure-
to-warn for a variety of reasons including, but not limited to,
the following:
If sirens or horns are placed outside the hearing range of
people in remote areas of the building or in areas which
are frequently closed off, they do not provide the intended
protection.
If intruders gain access through unprotected points of
entry, the system does not detect their entrance.
If intruders have the technical means of bypassing,
jamming, or disconnecting all or part of the system, they
are not detected.
If the AC power supply is OFF and the back up battery is
either missing or dead, sensors do not detect intrusion.
53