Bosch D621 Series User Manual page 22

D621 Series | User's Guide | Turn The System Part 2 On (Cmd 3)
3. Enter your passcode, if necessary. The Part On, Status,
and Cmd indicators light (Figure 10) and the exit delay
time starts.
Figure 10: Part 2 On Keypad Indication
1 2 3 4 5 6
9 10 11 12 13 14 15 16
During exit delay, you may stop the system from turning
on by entering your passcode.
If you wish, you can turn the system Part 2 On with No
Delay (refer to Section Turn The System On With No Delay on
page 24) by pressing [No Delay], or you may bypass
points by pressing [Bypass].
Bosch Security Systems | 8/04 |
All Status
7 8
Part Cmd
4. During the last 10 seconds of Exit Delay, the Exit Delay
tone becomes more urgent warning you not to exit or to
turn the system off. The system then turns Part On. The
Part On indicator remains on steady.
5. To turn the system off, enter your passcode.
22