View System Trouble (Cmd 42) - Bosch D621 Series User Manual

D621 Series | User's Guide | View System Trouble (Cmd 42)
The keypad only displays Points 1 to 16.
Bosch Security Systems | 8/04 |

View System Trouble (Cmd 42)

Use this command to view system trouble events. A system
trouble condition may occur if there is a communications
trouble, or it is time for the system to be serviced by your
security company.
1. Make sure the system is turned off (All and Part indicators
are off).
2. Press [Cmd] [4] [2]. The keypad may prompt you to enter
a valid passcode by flashing the Cmd light.
3. Enter your passcode. The keypad displays current system
trouble events by lighting the point indicators. Refer to
Table 6 on page 40.
39