Bosch D621 Series User Manual page 19

D621 Series | User's Guide | Turn The System All On (All On or Cmd 1)
3. Enter your passcode if necessary. Exit delay begins. The
All On, Status, and Cmd indicators light. You should
leave at this time.
Figure 8: All On Keypad Indication
1 2 3 4 5 6
9 10 11 12 13 14 15 16
During the exit delay, you may stop the system from
turning on by entering your passcode.
If you wish, you can turn the system All On with No
Delay (refer to Section Turn The System On With No Delay on
page 24) by pressing [No Delay] or you may bypass
points by pressing [Bypass]. Refer to Bypass Points on page
27 for more information.
Bosch Security Systems | 8/04 |
All Status
7 8
Part Cmd
4. During the last 10 seconds of Exit Delay, the Exit Delay
tone becomes more urgent warning you not to exit or to
turn the system off. The system then turns All On. The
All On indicator remains on steady.
5. To turn the system off, enter your passcode.
19