Securing Stove Pipe/Liner To Flue Collar; Optional Elbow Flue Adapter - Quadra-Fire 41I-ACC Owner's Manual

41I ACC Wood Insert
B. Securing Stove Pipe/Liner to Flue Collar
1. There are 4 pre-drilled holes in the flue collar 90 degrees
apart. Attach the flue collar to the stove pipe/liner. If the
seal is questionable use high temperature sealant such
as stove mastic Figure 39.1.
2. Attach gasket to bottom side of flue collar with a thin coat
of silicone.
Flue Collar
Figure 39.1
Page 40
Gasket
Stove Pipe/Liner
C. Optional Elbow Flue Adapter Installation
Optional use of a Simpson Duravent 15° Universal Elbow
Part Number 4615 may be purchased directly through your
local Simpson Durvent Pipe Distributor or from your local
Quadra-Fire dealer, Part Number 15DEGADAPT.
Figure 39.2 shows a vertical installation and also how to
create an optional 30° elbow installation.
The 15° elbow may be secured directly to the flue collar.
Follow the pipe manufacturer's instructions for using screws
or rivets for attachment. Most pipe manufacturer's 6 inch
(152mm) diameter flue liners may be attached directly to
the top of the 15° elbow.
Figure 39.1
7045-178
11 1/2 in.
292 mm
VERTICAL
23 3/8 in.
593 mm
12 1/2 in.
318 mm
30°
30 DEGREE
23 1/16 in.
586 mm
September 15, 2011
R