Surround & Trim Installation - Quadra-Fire 41I-ACC Owner's Manual

41I ACC Wood Insert
F. Surround & Trim Kit Installation
1. Lay surround face down on a protected surface to pre-
vent scratching.
2. Using a Phillips head screw driver attach the side sur-
rounds to the top surround using 2 #8 sheet metal screws
provided with the kit. Figure 41.1
3. Lay the trim face down and place the corner brackets into
position.
4. Using a standard flat screw driver tighten the corner
brackets. Figure 41.2.
5. Slide the trim over the surround set.
6. Install the surround set and trim set to the outer can.
Place the hook in the surround sides over the surround
attachment studs, 2 on each side. Figure 41.3.
7. Place top on top of appliance.
STOVE TOP
Figure 41.3
Page 42
Figure 41.1
Figure 41.2
7045-178
Secure 2 Side Surrounds to
Top Surround
Corner Brackets
SURROUND
ATTACH POINTS
September 15, 2011
R