Tube Channel Assembly Replacement - Quadra-Fire 41I-ACC Owner's Manual

R
F. Tube Channel Assembly Replacement
Removing Tube Channel Assembly
1. Remove the right side bricks (3 pieces).
2. Remove the baffle protection channel by rolling forward
and out of the firebox.
3. Locate the 2 channel nuts and 2 channel bolts inside of
chamber and remove.
NOTE: S oak the bolts with penetrating oil for at least 15 min-
utes before trying to remove them.
4. Slide the tube channel assembly all the way to left until
Ba e Boards
Figure 25.1
September 15, 2011
5. The ceramic blanket and both baffle boards can be
6. When the tube channel assembly is free of the left side
7. Re-install in reverse order.
2 Tube Channel Nuts
2 Tube Channel bolts
Ceramic Fiber
Blanket
Ba e Protection Channel
7045-178
it is off the threads. Drop the right side down, then slide
the assembly back to right.
removed at the same time you remove the tube channel
assembly.
support, rotate clockwise and pull assembly, blanket and
baffles out through the front opening.
3
4
41I ACC Wood Insert
1
2
Rotate and
remove from
firebox
Page 25