1. Manuals
  2. Brands
  3. Quadra-Fire Manuals
  4. Indoor Fireplace
  5. 43M-ACC-NZ
  6. Installation manual

Quadra-Fire 43M-ACC-NZ Installation Manual

4300 millennium new zealand wood appliance automatic combustion control (acc)
Hide thumbs Also See for 43M-ACC-NZ:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual, Installation
INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
4300 MILLENNIUM
NEW ZEALAND
WOOD APPLIANCE
AUTOMATIC COMBUSTION CONTROL
MODEL:
43M-ACC-NZ
1
Installation Manual
Installation & Appliance Set-Up
NOTICE: DO NOT DISCARD THIS MANUAL
(ACC)
If the information in these instructions
is not followed exactly, a fire could result
causing property damage, personal injury,
or death.
•
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
•
Do not over fire - If appliance or chimney connector
glows, you are over firing. Over firing will void your
warranty.
•
Comply with all minimum clearances to combustibles
as specified. Failure to comply may cause house fire.
HOT SURFACES!
Glass and other surfaces are hot during
operation AND cool down.
Hot glass and appliance will cause burns.
•
Do not touch glass until it is cooled
•
Use leather gloves when reloading fuel
•
NEVER allow children to touch glass
•
Keep children away
•
CAREFULLY SUPERVISE children in same room as
appliance.
•
Alert children and adults to hazards of high
temperatures
•
High temperatures may ignite clothing or other
flammable materials.
•
Keep clothing, furniture, draperies and other
flammable materials away.
Fire Risk.
For use with solid wood fuel only.
Other fuels may over fire and generate poisonous
gases (i.e. carbon monoxide).
7037-181A
WARNING
WARNING
WARNING
16 August, 2018

Advertisement

Table of Contents
loading

Related Manuals for Quadra-Fire 43M-ACC-NZ

Summary of Contents for Quadra-Fire 43M-ACC-NZ

  • Page 1 • Comply with all minimum clearances to combustibles MODEL: as specified. Failure to comply may cause house fire. 43M-ACC-NZ WARNING HOT SURFACES! Glass and other surfaces are hot during operation AND cool down. Hot glass and appliance will cause burns.

  • Page 2: Table Of Contents

    C. Firebox Installation ......8 D. Clearances to Combustibles ....9 Quadra-Fire is a registered trademark of Hearth & Home Technologies. 7037-181A...

  • Page 3: Important Safety Information

    NOTE: Hearth & Home Technologies, manufacturer of this appliance, reserves the right to alter its products, their specifications and/or price without notice. The Quadra-Fire 4300 Millennium New Zealand Wood Appliance is Hardwood and Softwood Certified. Hardwood Particulate Emissions equaling 2.5 g/kg with a Space Heating Efficiency of 78%. Softwood Particulate Emissions equaling 0.4 g/kg with a Space Heating Efficiency of 71%.

  • Page 4: Getting Started

    4300 Millennium NZ Wood Appliance Install Guide Getting Started A. Design and Installation Considerations B. Fire Safety To provide reasonable fire safety, the following should be Consideration must be given to: given serious consideration: • Safety 1. Install at least one smoke detector on each floor of •...

  • Page 5: Tools And Supplies Needed

    4300 Millennium NZ Wood Appliance To minimize the effects of negative air pressure: E. Inspection of Appliance and Components • Install optional outside air kit with the intake facing • Remove appliance and components from packaging prevailing winds during the heating season and inspect for damage.

  • Page 6: Install Checklist

    4300 Millennium NZ Wood Appliance G. Install Checklist ATTENTION INSTALLER: Follow this Standard Work Checklist This standard work checklist is to be used by the installer in conjuction with, not istead of, the instructions contained in this installation manual. _________________________________________________________________________________ Customer: ______________________________________________________________________________ Date Installe:...

  • Page 7: Dimensions And Clearances

    4300 Millennium NZ Wood Appliance Dimensions and Clearances A. Appliance Dimensions NOTE: Flue Collar size is 152mm inside diameter (ID) 667mm 92mm 333mm 170mm 278mm 773mm 383mm 533mm Figure 7.2 - Top View Figure 7.1 - Front View 728mm 668mm 820mm 501mm Figure 7.3 - Side View...

  • Page 8: Hearth Protection Requirements

    4300 Millennium NZ Wood Appliance C. Firebox Installation B. Hearth Protection Requirements Quadra-fire 4300 Millennium ACC do not require a 1. If a separate floor protector is being used position insulating Floor Protector, as they are tested and comply now. Place the firebox on the floor protector to suit the with the minimum Floor Protector requirements of AS/NZS minimum installation clearances (Figures 9.1 and 9.2...

  • Page 9: Clearances To Combustibles

    4300 Millennium NZ Wood Appliance D. Clearances to Combustibles MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS in Millimeters Note: A, C, and F Dimensions are to the center of the flue collar 4300 Millennium NZ Wood Appliance INSTALLATION DOUBLE WALL PIPE 1133 1380 1620 Figure 9.2...

  • Page 10: Chimney Systems

    4300 Millennium NZ Wood Appliance Chimney Systems A. Locating Your Appliance & Chimney • Consider the appliance location in order to avoid floor and ceiling attic joists and rafters. Location of the appliance and chimney will affect • Locate termination cap away from trees, adjacent performance.

  • Page 11: Minimum Height Of Flue System Exit

    4300 Millennium NZ Wood Appliance B. Minimum Height of Flue System Exit 3000mm more than 3000mm or less 600mm 3000mm minimum 3000mm increase from 1000mm minimum until clear within 3000mm of flue top increase as necessary until nothing within 3000mm of fluetop any nearby structure Figure 11.1 NOTICE:...

  • Page 12: Chimney Termination Requirements

    4300 Millennium NZ Wood Appliance C. Chimney Termination Requirements 8. Refer to steps 1 and 2 under Firebox Installation on page 8. • Flue pipe installed crimp/narrow end down 9. Prepare the ceiling plate and place upside down over • Outer casings installed crimped/narrow end up.

  • Page 13: General Flue System Instructions

    G. Proper Draft and secure the top bracket to the flue pipe with two To be sure that your Quadra-Fire insert burns properly, the stainless steel rivets (not supplied). chimney draft (static pressure) should be approximately -2.54mm water column (W.C.) during a high burn and...

  • Page 14: Tested Flue Systems

    4300 Millennium NZ Wood Appliance H. Tested Flue Systems , as per AS/NZS 2918:2001 ADD Cowl Casing Cover oversized casing cover minimum 25mm gap is necessary between flue pipe casing & Spider Bracket combustible material Non combustible material Hebel block or 12mm Promina board or similar under the flashing Approved Flashing...

  • Page 15: Un-Tested Flue Systems

    4300 Millennium NZ Wood Appliance I. Un-Tested Flue Systems , as per AS/NZS 2918:2001, 4.6.3(b) ADD Cowl AS/NZS2918:2001 Casing Cover Un-tested flue with sloped ceiling Spider Bracket penetration greater than 30° from horizontal A = 25mm Approved Flashing 4.6.3(b) Fig 4.6 = downward distance of casing and 3 x ø...

  • Page 16: Appliance Set-Up

    4300 Millennium NZ Wood Appliance Appliance Set-Up A. Outside Air Kit Installation WARNING A source of air (oxygen) is necessary in order for combustion to take place. Whatever combustion air is Fire Risk. consumed by the fire must be replaced. Air is replaced via Asphyxiation Risk.

  • Page 17: Door Handle Assembly

    4300 Millennium NZ Wood Appliance B. Door Handle Assembly Install spring handle using a counter-clockwise motion until the spring handle has a 51mm clearance from bend of door hand rod (Figure 17.1). 51mm clearance is required from bend in door handle rod to end of spring handle Spring handle...

  • Page 18: As/Nzs 2918:2001 General Notes

    4300 Millennium NZ Wood Appliance AS/NZS 2918:2001 General Notes WARNINGS WARNING: THE APPLIANCE AND FLUE SYSTEM SHALL BE INSTALLED IN ACCORDANCE WITH AS/NZS 2918 AND THE APPROPRIATE REQUIREMENTS OF THE RELEVANT BUILDING CODE OR CODES. WARNING: APPLIANCES INSTALLED IN ACCORDANCE WITH THIS STANDARD SHALL COMPLY WITH THE REQUIREMENTS OF AS/NZS 4013 WHERE REQUIRED BY THE REGULATORY AUTHORITY, I.E.

  • Page 19: Accessory List

    . Parts must be ordered from a dealer or Ceramic blanket Stocked Hearth and Home Technologies does not sell directly to consumers distributor. . Provide 43M-ACC-NZ Service Parts Baffle Fiber baffle model number and serial number when requesting service parts from your dealer or distributor. at Depot...
  • Page 20 Hearth & Home Technologies 352 Mountain House Road Halifax, PA 17032 Division of HNI INDUSTRIES Please contact your Quadra-Fire dealer with any questions or concerns. For the number of your nearest Quadra-Fire dealer log onto www.quadrafire.com CAUTION DO NOT DISCARD THIS MANUAL...

Table of Contents