2-10-3 Rule; F. 2-10-3 Rule - Quadra-Fire 41I-ACC Owner's Manual

R

F. 2-10-3 Rule

These are safety requirements and are not meant to assure proper flue draft.
This appliance is made with a 6 inch (152mm) diameter chimney connector as the flue collar on the unit.
• Changing the diameter of the chimney can affect draft and cause poor performance.
• It is not recommended to use offsets and elbows at altitudes above 4000 feet above sea level and or when
there are other factors that affect flue draft.
3 ft. (91cm)
Minimum
Figure 29.1
Figure 29.2
September 15, 2011
2 ft. (61cm)
10 ft. (305cm) To Nearest Roofline
10 ft. (305cm) or more
Wall or Parapet
3 ft. (91cm) Minimum
Less than 10 ft. (305cm)
2 ft. (61cm)
Pitched Roof
3 ft. (91cm) Minimum
Flat Roof
7045-178
41I ACC Wood Insert
3 ft. (91cm)
Minimum
Less than 10 ft. (305cm)
2 ft. (61cm) Minimum
Page 29