Tube Channel Assembly Replacement - Quadra-Fire VOYA-GRAND-MBK Owner's Manual

VOYAGEUR GRAND
G. Tube Channel Assembly Replacement
Removing Tube Channel Assembly
1. Remove the 3 right side bricks.
2. Remove the baffle protection channel by bending back
the tabs using needle nose pliers located at the right and
left side of the protection cover. Lift the cover up slightly
and pull toward the front and out of the firebox. Figure
24.1.
3. Locate the 2 channel nuts and two bolts inside of chamber
and remove using a 7/16 socket wrench. Figure 24.2.
NOTE: Soak the bolts with penetrating oil for at least 15 min-
utes before trying to remove them.
4. Slide the tube channel assembly all the way to left until it
is off the threads. Drop the right side down, then slide the
assembly back to right. Figure 24.3.
5. The ceramic blanket and both baffle boards can be
removed at the same time you remove the tube channel
assembly.
6. When the tube channel assembly is free of the left side
support, rotate clockwise and pull assembly, blanket and
baffles out through the front opening.
7. Re-install in reverse order.
Tube
Channel
Assembly
Figure 24.3
24
2 Tube Channel Nuts
Baffle
Protection Channel
Bend Back Tabs
Figure 24.1
Figure 24.2
Ceramic Blanket
7075-208D
Baffle Protection
Channel
Use 7/16 Socket Wrench
and Remove Channel Nuts
1
3
4
2 Baffle Boards
July 8, 2015
2