Upgrade The Router Firmware; Turn Off Automatic Firmware Checking - NETGEAR JWNR2000v2 User Manual

Upgrade the Router Firmware

The router firmware (routing software) is stored in flash memory. By default, when you log in
to your router, it checks the NETGEAR website for new firmware and alerts you if there is a
newer version.
WARNING!
When uploading firmware to the router, do not interrupt the Web
browser by closing the window, clicking a link, or loading a new
page. If the browser is interrupted, it could corrupt the firmware.

Turn Off Automatic Firmware Checking

You can turn the automatic firmware checking off and check for firmware updates manually if
you prefer. See
Manually Check for Firmware Upgrades
firmware check at log in:
Select Maintenance > Router Upgrade.
1.
Clear the Check for Updated Firmware Upon Log-in check box at the bottom of this
2.
screen:.
56 | Chapter 5. Network Maintenance
NETGEAR N300 Wireless Router JWNR2000v2 User Manual
on page 57. To turn off the automatic