NETGEAR JWNR2000v2 User Manual page 53

NETGEAR N300 Wireless Router JWNR2000v2 User Manual
If the Disable Port Triggering check box is selected after you
Note:
configure port triggering, port triggering is disabled. However, any
port triggering configuration information you added to the router is
retained even though it is not used.
In the Port Triggering Timeout field, enter a value up to 9999 minutes. This value controls
3.
the inactivity timer for the designated inbound ports. The inbound ports close when the
inactivity time expires. This is required because the router cannot be sure when the
application has terminated.
Click Add Service.
4.
The Port Triggering–Services screen displays.
5.
In the Service Name field, enter a descriptive service name.
6.
In the Service User field, select Any (the default) to allow this service to be used by any
7.
computer on the Internet. Otherwise, select Single address, and enter the IP address of
one computer to restrict the service to a particular computer.
Select the service type, either TCP or UDP.
8.
In the Triggering Port field, enter the number of the outbound traffic port that will cause the
9.
inbound ports to be opened.
Enter the inbound connection port information in the Connection Type, Starting Port, and
10.
Ending Port fields.
Chapter 4. Content Filtering | 53