NETGEAR JWNR2000v2 User Manual page 80

Click Apply.
8.
QoS for a MAC Address
To create a QoS policy for traffic from a specific MAC address:
Select Advanced > QoS Setup. The QoS Setup screen displays.
1.
On the QoS Setup screen, click Add Priority Rule.
2.
From the Priority Category list, select MAC Address. The QoS - Priority Rules screen
3.
changes:
If the device to be prioritized appears in the MAC Device List, select it. The information from
4.
the MAC Device List is used to populate the policy name, MAC Address, and Device Name
fields. If the device does not appear in the MAC Device List, click Refresh. If it still does not
appear, you must complete these fields manually.
From the Priority drop-down list, select the priority that this device's traffic should receive
5.
relative to other applications and traffic when accessing the Internet. The options are Low,
Normal, High, and Highest.
Click Apply to save this rule to the QoS Policy list and return to the QoS Setup screen.
6.
In the QoS Setup screen, select the Turn Internet Access QoS On check box.
7.
Click Apply.
8.
To edit or delete an existing QoS policy:
Select Advanced > QoS Setup. The QoS Setup screen displays.
1.
On the QoS Setup screen, select the radio button next to the QoS policy to be edited or
2.
deleted, and do one of the following:
Click Delete to remove the QoS policy.
•
Click Edit to edit the QoS policy. Follow the instructions in the preceding sections to
•
change the policy settings.
Click Apply in the QoS Setup screen to save your changes.
3.
80 | Chapter 6. Advanced Settings
NETGEAR N300 Wireless Router JWNR2000v2 User Manual