NETGEAR JWNR2000v2 User Manual page 62

Status. The link status of the port.
TxPkts. The number of packets transmitted on this port since reset or manual clear.
RxPkts. The number of packets received on this port since reset or manual clear.
Collisions. The number of collisions on this port since reset or manual clear.
Tx B/s. The current transmission (outbound) bandwidth used on the WAN and LAN ports
Rx B/s. The current reception (inbound) bandwidth used on the WAN and LAN ports.
Up Time. The time elapsed since this port acquired the link.
Poll Interval. The intervals at which the statistics are updated in this screen.
•
To change the polling frequency, enter a time in seconds in the Poll Interval field, and click
Set Interval. To stop the polling entirely, click Stop.
Connection Status Button. In the Router Status screen, click the Connection Status button
to display a screen similar to this:
IP Address. The IP address that is assigned to the router.
The subnet mask that is assigned to the router.
Subnet Mask.
Default Gateway. The IP address for the default gateway that the router communicates with.
DHCP Server. The IP address for the Dynamic Host Configuration Protocol server that
provides the TCP/IP configuration for all the computers that are connected to the router.
DNS Server. The IP address of the Domain Name Service server that provides translation of
network names to IP addresses.
Lease Obtained. The date and time that the lease was obtained.
Lease Expires. The date and time that the lease expires.
62 | Chapter 5. Network Maintenance
NETGEAR N300 Wireless Router JWNR2000v2 User Manual