Set Up Wep Wireless Security - NETGEAR JWNR2000v2 User Manual

NETGEAR N300 Wireless Router JWNR2000v2 User Manual
In the Passphrase field, enter a word or group of 8–63 printable characters. The
3.
passphrase is case-sensitive.
Click Apply to save your settings.
4.

Set Up WEP Wireless Security

WEP Shared Key authentication and WEP data encryption can be defeated by a determined
eavesdropper using publicly available tools.
To set up WEP data encryption:
If you use a wireless computer to setup WEP, you will be disconnected when you click Apply.
You can rejoin the network with its new security settings or use a wired connection to make
further changes. router. Not all wireless devices support passphrases. If yours does not, then
you will need to manually enter the WEP key in order to join the wireless network.
Select Setup > Wireless Settings.
1.
In the Mode field, select the legacy mode setting of Up to 54 Mpbs.
2.
The WEP and WPA radio buttons display in the Security Options section of the screen.
Select the WEP radio button and the screen expands as shown in the following figure:
3.
.
Select the authentication type and encryption strength.
4.
Chapter 3. Wireless Settings | 37