Use Netgear Genie After Installation; Upgrade Wireless Modem Router Firmware - NETGEAR DGND3700v2 User Manual

N600 Wireless Dual Band Gigabit ADSL2+ Modem Router DGND3700v2
• Browse to http://routerlogin.net.
• If your computer is set to a static or fixed IP address (this is uncommon), change the
setting to obtain an IP address automatically from the wireless modem router.
If the wireless modem router does not connect to the Internet:

1. Review your settings to be sure that you have selected the correct options and typed
everything correctly.
2. Contact your ISP to verify that you have the correct configuration information.
3. Read Chapter 10,
contact NETGEAR technical support.

Use NETGEAR Genie after Installation

When you first set up your wireless modem router, NETGEAR Genie automatically starts
when you launch an Internet browser on a computer that is connected to the wireless modem
router. You can use NETGEAR Genie again if you want to view or change settings for the
wireless modem router.
1. Launch your browser from a computer or wireless device that is connected to the
wireless modem router.
2. Type http://www.routerlogin.net or http://www.routerlogin.com.
The login window displays:
3. Enter admin for the wireless modem router user name and password for the wireless
modem router password, both in lowercase letters.
Note: The wireless modem router user name and password are different
from the user name and password for logging in to your Internet
connection. See
information.

Upgrade Wireless Modem Router Firmware

When you set up your wireless modem router and are connected to the Internet, the wireless
modem router automatically checks for you to see if newer firmware is available. If it is, a
Troubleshooting. If problems persist, register your NETGEAR product and
admin
********
Types of Logins and Access
Get Started with NETGEAR Genie
on page 24 for more
25