Change Password - NETGEAR JWNR2000v2 User Manual

NETGEAR N300 Wireless Router JWNR2000v2 User Manual
Contact your ISP to verify that you have the correct configuration information.
2.
Read
3. Chapter 7,
contact NETGEAR Technical Support.
If you cannot connect to the wireless router, check the Internet
Note:
Protocol (TCP/IP) properties in the Network Connections section of
your PC Control Panel. They should be set to obtain both IP and
DNS server addresses automatically.

Change Password

For security reasons, the router has its own user name and password that default to admin
and password. You can and should change these to a secure user name and password that
are easy to remember. The ideal password contains no dictionary words from any language
and is a mixture of upper case and lower case letters, numbers, and symbols. It can be up to
30 characters.
The router user name and password are not the same as the user
Note:
name and password for logging in to your Internet connection. See
Types of Logins
Select Maintenance > Set Password to display the following screen:.
1.
Enter the old password.
2.
Enter the new password twice.
3.
Click Apply to save your changes.
4.
After changing the password, you are required to log in again to continue the
configuration. If you have backed up the router settings previously, you should do a new
backup so that the saved settings file includes the new password. See
page 58 for information about backing up your network configuration.
Troubleshooting. If problems persist, register your NETGEAR product and
on page 28 for more information about login types.
Back Up
Chapter 2. Router Internet Setup
on
| 27