Table 9
Click the Settings tab, set the emulation to VT100, and click OK in the Switch Properties dialog box.
Set terminal emulation in Switch Properties dialog box
f.
Logging in to the CLI
The login process requires a username and password. The default username for first time configuration is
admin, no password is required. Usernames and passwords are case sensitive.
To log in to the CLI:
Table 10
Press Enter. The Username prompt displays:
Login authentication
Username:
Table 11
Enter your username at the Username prompt.
Username:admin
Table 12
Press Enter. The Password prompt display
Password:
The login information is verified, and displays the following CLI menu:
<HP V1910 Switch>
If the password is invalid, the following message appears and process restarts.
% Login failed!
20