HP V1910 User Manual page 360

Select Deny as the operation action.

In the IP Address Filter area, select the Destination IP Address check box, and enter 10.0.0.1 in the text

box.
 Enter 0.0.0.0 in the Destination Wildcard text box.
Click Add to finish the operation.

Table 121 Configure the 802.1X feature.
# Enable the 802.1X feature globally.
From the navigation tree, select Authentication  802.1X to enter the 802.1X configuration page.

Global 802.1X globally
l.
Select the check box before Enable 802.1X.

Select the authentication method as CHAP.

Click Apply to finish the operation.

# Enable 802.1X on port GigabitEthernet 1/0/1.
In the Ports With 802.1X Enabled area, click Add.

348