HP V1910 User Manual page 313

Item
Port Number
ACL
Enable HTTPS
service
Port Number
HTTPS
ACL
PKI Domain
Description
Set the port number for HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
IMPORTANT:
When you modify a port, ensure that the port is not used by other service.
Associate the HTTP service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTP service.
You can view this configuration item by clicking the expanding button in
front of HTTP.
Specify whether to enable the HTTPS service.
The HTTPS service is disabled by default.
Set the port number for HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
IMPORTANT:
When you modify a port, ensure that the port is not used by other service.
Associate the HTTPS service with an ACL. Only the clients that pass the ACL
filtering are permitted to use the HTTPS service.
You can view this configuration item by clicking the expanding button in
front of HTTPS.
Set the PKI domain for the HTTPS service.
You can configure the available PKI domains by selecting Authentication
 PKI from the navigation tree at the left side of the interface. For more
information, see the chapter "PKI configuration".
301