Enabling Snmp - HP V1910 User Manual

Task
Configuring SNMP trap
Configuring SNMPv3
Perform the tasks in
SNMPv3 configuration task list
1.
Task

Enabling SNMP

Configuring an SNMP
Configuring an SNMP
Configuring an SNMP
Configuring SNMP trap
Enabling SNMP
Select Device  SNMP from the navigation tree to enter the SNMP configuration page, as shown in a. On
the upper part of the page, you can select to enable or disable SNMP and configure parameters such as
SNMP version; on the lower part of the page, you can view the SNMP statistics, which helps you
understand the running status of the SNMP after your configuration.
Remarks
Optional
Allows you to configure that the agent can send SNMP traps to the
NMS, and configure information about the target host of the SNMP
traps.
By default, an agent is allowed to send SNMP traps to the NMS.
1 to configure SNMPv3:
Remarks
Required
The SNMP agent function is disabled by default.
Optional
After creating SNMP views, you can specify an SNMP view for an
SNMP group to limit the MIB objects that can be accessed by the SNMP
group.
Required
After creating an SNMP group, you can add SNMP users to the group
when creating the users. Therefore, you can realize centralized
management of users in the group through the management of the
group.
Required
Before creating an SNMP user, you need to create the SNMP group to
which the user belongs.
Optional
Allows you to configure that the agent can send SNMP traps to the
NMS, and configure information about the target host of the SNMP
traps
By default, an agent is allowed to send SNMP traps to the NMS.
117