HP V1910 User Manual page 19

Function menu
Modify
Remove
Switch To
Management
Loopback Loopback
VCT VCT
Port Traffic
Statistics
Flow
Interval
Interval
Configuration
Storm
Storm Constrain
Constrain
Statistics
History
RMON
Alarm
Event
Log
Energy
Energy Saving
Saving
Setup
Community
SNMP
Group
User
Description
Allows you to modify FTP or Telnet user
information.
Allows you to remove an FTP or a Telnet user.
Allows you to switch the current user level to the
management level.
Allows you to perform loopback tests on Ethernet
interfaces.
Allows you to check the status of the cables
connected to Ethernet ports.
Displays the average rate at which the interface
receives and sends packets within a specified time
interval.
Allows you to set an interval for collecting traffic
statistics on interfaces.
Displays and allows you to set the interval for
collecting storm constrain statistics.
Displays, and allows you to create, modify, and
remove the port traffic threshold.
Displays, and allows you to create, modify, and
clear RMON statistics.
Displays, and allows you to create, modify, and
clear RMON history sampling information.
Allows you to view, create, modify, and clear
alarm entries.
Allows you to view, create, modify, and clear event
entries.
Displays log information about RMON events.
Displays and allows you to configure the energy
saving settings of an interface.
Displays and refreshes SNMP configuration and
statistics information.
Allows you to configure SNMP.
Displays SNMP community information.
Allows you to create, modify and delete an SNMP
community.
Displays SNMP group information.
Allows you to create, modify and delete an SNMP
group.
Displays SNMP user information.
Allows you to create, modify and delete an SNMP
user.
7
User level
Management
Management
Visitor
Configure
Configure
Monitor
Configure
Configure
Configure
Configure
Configure
Configure
Configure
Configure
Monitor
Configure
Monitor
Configure
Monitor
Configure
Monitor
Configure