Trace Route Operation - HP V1910 User Manual

Ping operation result
b.

Trace route operation

NOTE:
The web interface supports trace route on IPv4 addresses only.
Before performing the trace route operation on the Web interface, on the intermediate device execute
the ip ttl-expires enable command to enable the sending of ICMP timeout packets and on the
destination device execute the ip unreachables enable command to enable the sending of ICMP
destination unreachable packets.
Select Network  Diagnostic Tools from the navigation tree and then select the Trace Route tab to enter the
trace route configuration page, as shown in a.
Trace route configuration page
a.
304