HP V1910 User Manual page 276

Click Apply to complete the operation.

# Enable the fast leave function for GigabitEthernet 1/0/3.
Click the Advanced tab.

Configure IGMP snooping on GigabitEthernet 1/0/3
f.
Select GigabitEthernet 1/0/3 from the Port drop-down list.

Type the VLAN ID 100.

Select the Enable radio button for Fast Leave.

Click Apply to complete the operation.

Configuration verification
# Display the IGMP snooping multicast entry information on Switch A.
Select Network  IGMP Snooping in the navigation tree to enter the basic configuration page.

Click the plus sign (+) in front of Show Entries in the basic VLAN configuration page to display

information about IGMP snooping multicast entries, as shown in a.
IGMP snooping multicast entry information displaying page
a.
Click the

this entry, as shown in b.
icon corresponding to the multicast entry (0.0.0.0, 224.1.1.1) to view information about
264