Configuration Settings; Configuration Jumpers/Switches; Figure 7. Location Of The Configuration Jumpers/Switches - Intel Core 2 Duo Processor User Manual

4.3

Configuration Settings

4.3.1

Configuration Jumpers/Switches

Caution: Do not move jumpers with the power on. Always turn off the power and unplug the
power cord from the computer before changing jumper settings. Else, it may damage the
board.
Note: Some jumpers may fall off during shipment. Jumpers that are only attached to one pin
(noted as 1-x) are more prone to becoming detached. Replacing detached 1-x
jumpers is not required for proper board operation.
Figure 7
summarizes the jumpers and switches and gives their default and optional settings.
The board is shipped with the jumpers and switches shunted in the default locations.

Figure 7. Location of the Configuration Jumpers/Switches

50
shows the location of the configuration jumpers and switches.
Development Board Physical Reference
Development Kit User's Manual
T able 18
2