Rework To Change Eaglemont Card From Hdmi To Display Port; Figure 12. Eaglemont Add-In Card - Intel Core 2 Duo Processor User Manual

Figure 12. Eaglemont Add-in Card

A.3.1 Rework to Change Eaglemont Card from HDMI to
Display Port
Note: All rework should use lead-free solder in order to keep the board RoHS compliant.
1. Resistors R5D7, R5D5, R5D3, R5C19, R5C16, R5C12, and R5C11 need to be
taken off and placed in the ref des. R5D6, R5D4, R5D, R5C18, R5C17, R5C14,
R5C13, and R5C10. In the picture below the highlighted areas show where the
resistors should end up. Move the vertically-mounted resistors horizontally.
60
Add-In Cards
Development Kit User's Manual