Safety Compliances; Figure 1: Connecting The Gxp2110 And The Gxp-Extension - Grandstream Networks GXP2110 User Manual

F 1: C
IGURE ONNECTING THE
GXP–2110 w/GXP–Extension
Connecting the GXP–2110
w/GXP–Extension
Reverse side of connection
w/connection plate
Connect the first GXP-EXT to the GXP2110 using the connection cable found in the GXP Extension
package. The first GXP-EXT draws power directly from the phone. Connect the second GXP Extension unit
using the connection plate and the connection cable. The GXP2110 will automatically reboot and power up
the GXP Extensions. Grandstream recommends, though not required, to use a separate power supply with
the second GXP-EXT.
NOTE: Should your system lose power, please unplug your devices and power up the GXP2110 first.
Powering up the system:
1. The GXP will boot up first;
2. The GXP LEDs will be solid red;
3. The status light in the top right corner of the GXP–Ext will blink red;
4. All of the LED indicators on the GXP–Ext will flash three times;
5. The status light at the top right corner of the GXP–Ext will turn to solid green.
NOTE:
1. Extension for GXP2110 does not support hot-swap. Once connected, user should reboot the phone
to ensure the set up will work correctly.
2. GXP2110 can drive 2 extension modules. Independent power adapters are not needed for extension
modules.
S C
AFETY OMPLIANCES
Grandstream Networks, Inc.
GXP2110 GXP–E
AND THE
GXP2110 User Manual
Firmware 1.0.0.44
XTENSION
GXP Extension
Reverse side of connection
w/connection plate
Page 6 of 42
Last Updated: 09/2010