Grandstream Networks GXP2110 User Manual page 30

Automatic Upgrade
Authenticate Conf File
Phonebook XML
Download
Phonebook XML Server
Path
Phonebook Download
Interval
Remove Manually-edited
entries on Downloads
LDAP Directory
Idle Screen XML
Download
XML Application
Softkey Label
Offhook Auto Dial
Syslog Server
Grandstream Networks, Inc.
This function is used by ITSP. End user should NOT touch these parameters.
Default is No. Choose "Yes" to enable automatic HTTP upgrade and
provisioning.
In "Check for upgrade every" field, enter the number of minutes to check the
HTTP server for firmware upgrade or configuration changes. When set to "No",
the phone will only perform HTTP upgrade and configuration check once at
boot up.
Default is "No". If set to "Yes", configuration file would be authenticated before
acceptance. End user should use default setting.
Selects the file download mode for the download server. Users can choose
from TFTP/HTTP/No.
The URL/IP address of the phonebook download server
The interval at which the phonebook will be downloaded from the download
server (in Minutes). The default setting is 0.
If set to "Yes", the phone will remove the manually-edited entries in the old
phonebook list before downloading the new file. The default setting is set to
"Yes".
IP address or domain name of LDAP script server
Enable XML Idle Screen download via TFTP or HTTP. Select whether to "Use
Custom Filename" or not, and define the "XML server path".
Enter server path for XML application.
Defines the softkey label for the XML application
To configure a User ID/extension to dial automatically when the phone is taken
offhook.
The IP address or URL of System log server. This feature is especially useful
for ITSPs.
GXP2110 User Manual
Firmware 1.0.0.44
Page 30 of 42
Last Updated: 09/2010