3. C
R
: To call the last phone number that called your phone.
ALL
ETURN
When returning a call, the phone will use the same SIP account as the call was made to. Thus, when
returning a call made to the third SIP account, the phone will use the third SIP account return the
call.
i. Hand-free option
1. Press the CALL RETURN soft-key
ii. Hand-set option
1. Take the Handset off-hook
2. Press the CALL RETURN soft-key
4. U
SING
THE
CALL
When using the call history, the phone will use the same SIP account as was used for the last
call/call attempt. Thus, when returning a call made to the third SIP account, the phone will use the
third SIP account return the call.
•
Press the MENU button to bring up the Main Menu.
•
Select Call History and then "Received Calls", "Missed Calls" or "Dialed Calls" depending on
your needs
•
Select phone number using the arrow keys
•
Press OK to select
•
Press OK again to dial.
5. U
SING
THE
PHONEBOOK
Each entry in the phonebook can be attached to an individual SIP account. The phone will use that
SIP account to make the phone call.
•
Go to the phonebook by:
i. Pressing the phonebook button (bottom, left-hand side of phone), or
ii. Pressing the DOWN arrow key, or
iii. Pressing the menu button and
Selecting "Phone book" and
Press MENU
•
Select the phone number by using the arrow keys
•
Press OK so select
•
Press OK again to dial.
6. P
/I
AGING
NTERCOM
The paging/intercom function can only be used if the SERVER/PBX supports this feature and both
the phones and PBX are correctly configured.
•
Take the Handset/SPEAKER/Headset off-hook,
•
Select the LINE key associated with account
•
Press OK key to display LCD: LINEx: PAGE.
•
Dial the phone number you want to Page/Intercom
•
Press SEND key.
NOTE: Dial-tone and dialed number display occurs after the handset is off-hook and the line key is selected.
The phone waits 4 seconds (by default; No key Entry Timeout) before sending and initiating the call. Press
the "SEND" or "#" button to override the 4 second delay.
Speed Dial
The Multi Purpose Key buttons, located on the right-hand-side of the phone, can be configured for speed
dial. Press the speed dial button to automatically call the assigned extension.
Grandstream Networks, Inc.
:
To
HISTORY
:
Calling
:
GXP2110 User Manual
Firmware 1.0.0.44
call
a
phone
number
a
phone
in
from
in
the
phone's
history
the
phone's
phonebook.
Page 16 of 42
Last Updated: 09/2010