Grandstream Networks GXP2110 User Manual page 22

Config
Factory Functions
Reboot
Exit
Grandstream Networks, Inc.
•
LCD Contrast
•
LCD Brightness
•
Download SCR XML
The phone will download the custom idle screen (if available)
•
Erase Custom SCR
Custom idle screen will be erased and will be replaced with
default Grandstream logo.
•
Display Language
You can choose English, Simplified Chinese, Traditional
Chinese, Korean, Japanese, Italian, Spanish, French,
German or Secondary Language
Press Menu button to choose the menu item.
Press '←' to return to the main menu.
Press Menu button to display the configuration selections:
•
Network.
To enable/disable DHCP.
To setup IP-address, Net mask and Gateway address
•
SIP
To change SIP-server settings for primary account.
•
Upgrade
In this menu setting regarding the firmware server and Config
server can be changed. It also enables the user to make the
phone attempt to download new firmware.
•
Factory Reset
Key in the physical/MAC address on back of the phone.
Press Menu button to reset FACTORY DEFAULT setting. Do not
use Factory Reset unless you want to restore factory settings
•
Layer 2 QoS
Configure VLAN Tags
Press '←' to return the main menu.
Press Menu to display the factory function items including
•
Audio Loopback
Speak into the handset. If you hear your voice in the handset,
your audio works fine.
Press Menu button to exit the mode.
•
Diagnostic Mode
All LEDs will light up
Press any key on the keypad, to display the button name in the
LCD. Lift and put back the handset or press Menu button to exit
the diagnostic mode.
Press '←' to return to the main menu.
Press Menu button to reboot the device
Display "Exit"
Press Menu button to exit the menu
Exit from this menu.
GXP2110 User Manual
Firmware 1.0.0.44
Page 22 of 42
Last Updated: 09/2010