Call Features; Table 11: Gxp Call Features; Grandstream Networks, Inc - Grandstream Networks GXP2110 User Manual

All the users that belong to the same SCA group will be notified by visual indicator when a user seizes the
line and places an outgoing call, and all the users of this group will not be able to seize the line until the line
goes back to an idle state or when the call is placed on hold. (With the exception of when multiple call
appearances are enabled on the server side).
In the middle of the conversation, there are two types of hold: Public Hold and Private Hold. When a member
of the group places the call on public hold, the other users of the SCA group will be notified of this by the red-
flashing button and they will be able to resume the call from their phone by pressing the line button. However,
if this call is placed on private-hold, no other member of the SCA group will be able to resume that call.
To enable shared call appearance, the user would need to
•
Register the shared line account on one of the accounts on the phone.
•
Navigate to "Settings"->"Basic Settings" on the web UI
•
Set the line to "Shared Line" with the corresponding account.
If the user requires more shared call appearances, the user can configure multiple line buttons to be "shared
line" buttons associated with the account.
C F
ALL EATURES
The GXP2110 supports traditional and advanced telephony features including caller ID, caller ID w/name,
call forward/transfer/park/hold as well as intercom/paging and BLF.

Table 11: GXP Call Features

Key

Call Features

*30 Block Caller ID (for all subsequent calls)
*31 Send Caller ID (for all subsequent calls)
*67 Block Caller ID (per call)
*82 Send Caller ID (per call)
*70 Disable Call Waiting (per Call)
*71 Enable Call Waiting (per Call)
*72 Unconditional Call Forward
Dial "*72" for a dial tone. Dial the forwarding number followed by "#". Wait for dial
tone. LCD will display "Call FWD Activated".
*73 Cancel Unconditional Call Forward: dial "*73" and get the dial tone, then hang up.
LCD will display "Call FWD Activated".
*90 Busy Call Forward
Dial "*90" for a dial tone. Dial the forwarding number followed by "#". Wait for a dial
tone. Hang up.
*91 Cancel Busy Call Forward: dial "*91". Wait for dial tone. Hang up.
*92 Delayed Call Forward
Dial "*92" for a dial tone. Dial the forwarding number followed by "#". Wait for a dial
tone. Hang up. LCD will display "Call FWD Activated".
*93 Cancel Delayed Call Forward

Grandstream Networks, Inc.

GXP2110 User Manual
Firmware 1.0.0.44
Page 20 of 42
Last Updated: 09/2010