Accessing The Printer Settings - Kodak 6850 User Manual

Accessing the Printer
Settings
Printer Setting Operator Panel
Display
Printer ready Ready
Changing energy Energy Save
save mode Mode
Test Print Mode Press Enter to make a test print. See
Making a test
print
Check remaining Remain =
paper status XXX/YYY
Checking the Printed =
printer total print XXXXX
count
Checking the Donor = XX[%] None. XX[%] represents the percentage of the installed
ribbon status
Checking the Main Firm =
printer firmware
version
Checking the DSP Firm =
image processing
firmware version
November 2011
Press Menu repeatedly to scroll through the printer settings in the
following order.
Action Required
None. The printer is on and ready to make prints.
Press Enter to turn Energy Save Mode on or off. The default is
off. When turned on, the printer goes into a standby mode
after 30 minutes, using less power. When the printer goes
into standby, the time for the first print is increased. Press:
• Energy Save Mode
• Enter
• "+" or "-" to turn on or off
• Enter
• Clear
page 1-10.
None. XXX represents how many remaining prints you can
make with the current paper roll. YYY represents the total
number of prints on a paper roll. The counter is reset each
time you press Paper Rewind.
None. XXXXX represents the total number of prints made
since the printer was manufactured. This counter cannot be
reset.
ribbon that is available for making prints.
None. The printer control firmware version number is
displayed.
None. The image processing firmware version is displayed.
Operating the Printer
"Making a Test Print" on
4-3