Printer Settings - Kodak D4600 User Manual

Printer Settings

Printer settings are
displayed here
Display
Ready 8x10
Ready 8x12
Test Print Mode
Remain = XXX/YYY XXX represents how many remaining prints you can make with
Printed = XXXXXX
Donor = XXX[%]
MAIN Firm = XX.YY
DSP Firm = XX.YY
TABLE = XX.YY
April 2014
Use the operator panel buttons to review and change printer
settings.
1. Press Menu to enter Setup Mode.
2. Press +/- to scroll through selections.
3. Press Enter to initiate an action or accept a change.
4. Press Menu to exit Setup Mode.
Description
The printer is on and ready to make prints. 8x10 or 8x12
represents the size of ribbon that is loaded.
When selected, press Enter to make a test print (see
Test Print" on page 1-11).
the current paper roll. YYY represents the total number of prints
on a paper roll.
XXXXXX represents the total number of prints made since the
printer was manufactured. This counter cannot be reset.
XXX[%] represents the percentage of the ribbon that is available
for making prints.
XX.YY represents the version number of the printer control
firmware.
XX.YY represents the version number of the image processing
firmware.
XX.YY represents the version number of the print parameter
table.
Operating the Printer
1,4
2
3
"Making a
2-3